POOL BUILDING BASICS GUIDE in Bangladesh

Best Swimming Pool Builders in Bangladesh; swimming pool builders in Bangladesh; swimming pool supplier in Bangladesh; swimming pool equipment installation in Bangladesh; swimming pool price in Bangladesh; indoor swimming pool in Dhaka; water pool bd; Bangladesh swimming pool; swimming pool tiles in Bangladesh; Swimming Pool Equipment Supply, Construction & Installation in Bangladesh; Swimming Pool Builders & Equipment Suppliers company in BD; Best swimming pool accessory supplier in Bangladesh; Best Swimming Pool Builders in Bangladesh; Best Swimming Pool company in Bangladesh; best swimming pool supplier in Bangladesh; best swimming pool equipment installation company in Bangladesh; swimming pool accessories price in Bangladesh; swimming pool equipment’s price in Bangladesh; indoor swimming pool maker in Dhaka; water pool maker bd; Bangladeshi swimming pool company; swimming pool tiles fitting company in Bangladesh; best Swimming Pool Equipment Supply; Construction & Installation company in Bangladesh; Best Swimming Pool Builders company in BD; Equipment Suppliers company in BD

BD Swimming Pool is the best Swimming Pool Builders company in Bangladesh;and also swimming pool supplier in Bangladesh; swimming pool equipment installation in Bangladesh;

Owning a home with a beautiful pool is a dream many people have. But, you can set yourself apart by gaining valuable knowledge on what it actually takes to make that dream a reality. Our guide will walk you through what it takes to build a pool and what questions you should ask the builder. The more you can verbalize what you’re looking for, the easier it will be for everyone involved in the building process. You’ll need to provide the builder with a survey, basic design ideas and an expected budget. It is also important you understand the process that takes place during the construction phase to eliminate unexpected surprises. The majority of your enjoyment is going to come from the pool’s aesthetic value, in our opinion. So, make sure you think about that area (and not just how you will swim in it).

We do not recommend a fiberglass or vinyl pool in South Florida due to quality, weather and draining issues. A concrete pool shell, in our opinion, is the best investment in your property. On average, a basic in-ground concrete pool normally ranges from $30,000 to $50,000. Options are endless, and if a basic pool is not what you are looking for, you can easily spend upwards of $80,000 to $200,000. We are currently building a residential pool in Miami for $1.4 million. It’s a piece of art and the centerpiece of the outdoor entertainment area, and it should match up with the investment and the surrounding area. What kind of pool do I want, and what is my budget? Type: Full Tile with Spa Cost: $220,000 Type: DiamondBrite, No Spa Cost: $40,000 Type: Infinity Edge with Spa Cost: $85,000

What is the city or county set back requirement? This is important to learn early on, especially if you are looking to buy a house without a pool and plan on installing one. Consult a pool contractor, research these requirements online or call the county building department office. Counties, communities, associations and neighborhoods all vary. Do not settle for anyone that says, “I think” or “I heard” because every inch counts. Pool contractors should visit the yard and take measurements before they give you a price. You can always apply for a variance if it is marginal, but these may take a long time to be approved if they are approved at all. A quality discussion should include a property survey to know exactly where the property starts and ends. As an example, on a full sized lot, these are typical requirements: 30 feet from the front street, 20 feet from the side street, 5 feet from the neighbor’s property line and 7 ½ feet from the rear of the property (dry lot). For rear setbacks for canal properties, the setbacks start from the mean high waterline (if you have a bulk head, that is where the 20 feet starts, or if you have a floating dock or a beach, it is where you average tide line sits). There is a possibility (nothing guaranteed) that we can encroach this setback by up to 10 feet as long as we maintain our 60/40 rule for stormwater runoff. To investigate this possibility, it will require a customized discussion with a county official. Disclosure: This is information that we have gathered from experience and research, but it is subject to change.

Coastal real estate has unique soil conditions requiring some concrete structures, such as pools, to need pilings to retain the integrity of the structure. A pool engineer can determine if a pool needs pilings based on experience in a certain area, drilling or a soil test. Pilings are 10- to 16- inch diameter auger, precast or helical poles that are driven or twisted into the ground at specified locations around a pool. Some pilings will be pushed into the bed rock below the pool and cause more load-bearing capacity. Pilings typically are installed into rock to bear the weight and stabilize the concrete structure. A soil test is the best way to determine with certainty, and it costs roughly $1,500 to $3,000 to perform. If the pool will need pilings, it will increase the cost of the pool anywhere from $4,000 to $15,000, depending on the size and how many pilings you need. Do I need pilings for my pool foundation

The smallest we recommend for a pool is a 12-by-22-foot (although we have built smaller) pool, but the standard size is about 15-by-30 feet. This all depends on how much space you have and how you will be using the pool. For instance, if you would want to swim laps in the pool or have children who love to swim, a larger pool would be preferred. If you want to entertain guests and need more patio space, a smaller pool would work better. The larger the pool, the more expensive it will be to build due to concrete, labor, materials, excavation, etc. Each foot is roughly $100 to $150 on average. What will be the size of the pool? ~20’x10’ with spa ~14’x24’ with spa ~18’x38’ with spa.

This is where creativity comes into play. There are many pools in Florida that have a three-circle or kidney shape. This all has to do with the location of the house and sometimes the architecture of the house. A square or rectangle pool is simple and works well with thinner properties with limited space. Rectangular pools are also better to swim laps if you want to exercise. The shape of the pool should not significantly affect the price unless water movement, wet edges, spillways or finishes need to be custom designed. What is the shape of the pool? What will be the depth of the pool? The recommended depth of the pool (deep end) should not exceed 5 feet. Unless you have another reason for a deep pool, there is no need for anything deeper than 5 feet because it is unusable (people can’t stand). The deeper the pool, the more expensive it can get due to the possible need for “dewatering” during the construction phase, if below the water line, along with extra concrete, steel

What does the construction process ?

The Design Phase: Most of the questions in this guide pertain to this phase. 2. Permitting Phase: Your pool contractor should provide engineered drawings to an expediter who uses the drawings to get approval from the city, county and/or community association. This process can take between 10 and 60 days depending on the location. 3. Excavation & Form Phase: Excavate the hole and form the pool with wood forms using the engineered drawings as a plan. 4. Steel Phase: Place the rebar according to the engineering. Steel increases the strength of concrete. 5. Plumbing Phase: Place pipe for the water and the electrical lights to the pool. Pipes are pressurized and inspected. 6. Shot-crete or Gunite Phase: Concrete is placed and shaped using high-pressure air to the steel forms and reinforcement. 7. Curing Phase: It takes about 20 days of curing, which is best for recommended curing of the shell. 8. Coping Phase: Start installing the coping (edge of deck), waterline tile and any water features that might be included in your design. 9. Equipment Set Phase: Install all of the pool equipment including: pumps, filters, lighting, salt systems, electronics and heaters. 10.Finish & Fill Phase: Apply DiamondBrite, pebble or tile finish. Then, water is placed in the pool.

What will be the size of the pool?
The smallest we recommend for a pool is a 12-by-22-foot (although we have built smaller) pool, but the standard size is about 15-by-30 feet. This all depends on how much space you have and how you will be using the pool. For instance, if you would want to swim laps in the pool or have children who love to swim, a larger pool would be preferred. If you want to entertain guests and need more patio space, a smaller pool would work better. The larger the pool, the more expensive it will be to build due to concrete, labor, materials, excavation, etc. Each foot is roughly $100 to $150 on average.

What is the shape of the pool?
This is where creativity comes into play. There are many pools in Florida that have a three-circle or kidney shape. This all has to do with the location of the house and sometimes the architecture of the house. A square or rectangle pool is simple and works well with thinner properties with limited space. Rectangular pools are also better to swim laps if you want to exercise. The shape of the pool should not significantly affect the price unless water movement, wet edges, spillways or finishes need to be custom designed.

What will be the depth of the pool?
The recommended depth of the pool (deep end) should not exceed 5 feet. Unless you have another reason for a deep pool, there is no need for anything deeper than 5 feet because it is unusable (people can’t stand). The deeper the pool, the more expensive it can get due to the possible need for “dewatering” during the construction phase, if below the water line, along with extra concrete, steel and possibly labor.

What finish or surface do you want?
A finish can certainly add that extra beautification element to a pool. The standard finish is DiamondBrite, which can look excellent. In eight to 10 years, it will need to b re-finished after it fades or gets spotty. We typically acid wash a DiamondBrite pool after about four years, but it can last up to 12 years. Another option is a pebble finish. This can add a great look to any pool and shimmers in the sunlight. Lastly, but most expensive, is a tile finish which can look the most elegant depending on the tile selection. Typically, a full tile finish will cost roughly the same amount in tile and installation as the rest of the pool.
What kind of pool equipment do I need?

All pools need a filter and pump. Besides that, you can choose to add a heater, a chiller, a salt water chlorine generator, advanced control systems and unique lights.
Some of this equipment:
Gas Heaters and Heat Pumps
Chlorine Generators
Control Systems
Lighting
Automation Motors, pumps and filters

After the strategic issues have been consolidated, information needs to be gathered in a logical, methodical way to develop a Statement of Requirements (SOR) that will inform the brief for the design team. This will be used to build the business case for the development and assist in making well-informed decisions that will stand up to challenge and scrutiny. The SOR will then be used to appoint a design team who will take the project forward with the main project team.
Key questions include:
• Who will be the principal users?
• What activities need to be accommodated?
• What are the requirements for the type, size and depth of pool(s)?
• How many people will use the pool at any one time?
• Will the pool(s) be used for competitive events? If so, what activities to what levels?
• Is spectator viewing required? If so, what extent of accommodation can be justified? Pool users
may comprise a combination of the
following groups:
• Local community including ethnic/cultural
groups
• Schools
• Swimming clubs
• People with disabilities
• Older people
• Carers with babies and young children. The main types of activity are likely to be:
• Recreational swimming
• Learning to swim, including water acclimatization for young children
• Fitness swimming e.g. lane swimming and aqua aerobics
• Training
• Competitive swimming. Other activities may include:
• Diving
• Water polo
• Synchronised swimming
• Canoe practice
• Life saving practice
• Sub-aqua training
• Underwater hockey
• Leisure activities
• Private parties.
Nearly all of these activities can be accommodated in a standard 25 m (or 20 m)12 community pool with depths ranging from 0.9-1.8 m, by simply dividing the area with floating lane markers.

Bd Swimming Pool performs complete pool buildings, along with renovations and resurfacing. We are the largest and most experienced pool construction company in Dhaka, bangladesh. We offer proposals upon request along with designing, engineering and permitting services. We also service our pools after completion. Our experience building pools goes back many years. Since then, we have helped hundreds of homeowners realize their dreams of relaxing in their own private, custom pool. We can help you revamp a tired pool or create a completely new centerpiece for your backyard. Whether it is a modern vanishing-edge, tropical lagoon or a Romanesque bath, all of our pools are truly works of art. Interested in our construction services or want more information? Send an email with the construction address and contact information.